Division 10 Products — Supplied and Installed in NY, NJ & CT

Mavi New York supplies and installs Division 10 products for commercial and public buildings across the New York Metropolitan area, New Jersey and Connecticut. Division 10 is the specialties division of a construction spec — the toilet partitions, washroom accessories, lockers, wall protection and display boards that get specified late, ordered late, and hold up a certificate of occupancy when they arrive wrong. We handle the takeoff, the submittals, the material and the installation, so it’s one scope with one point of contact instead of four vendors pointing at each other.

Browse the categories below, or send us your drawings and we’ll come back with a quantified scope.


Stainless steel floor-mounted overhead-braced toilet partitions in a commercial restroom

Toilet Partitions

 


Double-tier powder-coated steel lockers in a school locker room

Lockers

 


Recessed stainless steel paper towel dispenser and waste receptacle

Bathroom Accessories

 


Wall-Padding

Wall Padding

 


Visual Display Boards

Visual Display Boards

 


Countertops

Countertops

 


Medicine-Cabinets

Medicine Cabinets

 


Cubical-Curtains-Tracks

Cubical Curtains & Tracks

 


Bike-Racks

Bike Racks

 

What we supply and install

Toilet Partitions — Section 10 21 13

Toilet compartments and urinal screens in powder-coated steel, solid plastic (HDPE), solid phenolic, plastic laminate and stainless steel — floor-mounted overhead-braced, floor-to-ceiling, ceiling-hung or floor-mounted without a headrail. The material choice is really a durability-versus-budget decision: HDPE won’t rust or delaminate and cleans up after graffiti, which is why it dominates schools and pool buildings; laminate offers the widest finish range but is the wrong call for a wet room. → See toilet partitions

Lockers — Section 10 51 00

Powder-coated steel, HDPE, phenolic and laminate lockers in single tier, double tier, box, Z-locker and athletic configurations, with benches, sloped tops, number plates and your choice of built-in combination locks, padlock hasps or keypad locks. Wet locker rooms and natatoriums are where steel lockers fail first — plastic is usually the cheaper answer over ten years. → See lockers

Bathroom Accessories — Section 10 28 00

Grab bars, mirrors, soap and towel dispensers, combination towel/waste units, hand dryers, sanitary napkin disposals, baby changing stations, shelves and hooks — surface-mounted, semi-recessed, recessed or partition-mounted. If anything on your accessory schedule is recessed, we should be talking before the walls close; recessed units need wall depth coordinated at framing, and that missed dimension is one of the most common RFIs on a restroom package. → See bathroom accessories

Wall Padding

Vinyl-covered foam padding over plywood backing for gymnasiums, sensory rooms and behavioral health spaces, plus column pads and safety padding — wall-mounted or floor-mounted, with or without a top return. Panel layout has to be coordinated with existing wall devices, outlets and door swings, so a field measure before ordering saves a second lead time. → See wall padding

Visual Display Boards — Section 10 11 00

Porcelain enamel steel markerboards (magnetic, the long-warranty classroom standard), glass markerboards, cork and vinyl-faced tackboards, combination units, sliding multi-surface units, display cases and trophy cases. Blocking behind the wall matters here — a full-length board hung on drywall anchors will not survive a school year. → See visual display boards

Countertops

Commercial restroom vanity tops in solid surface, quartz and phenolic, with integral or undermount basins, backsplashes and support brackets. Field-measured after the rough plumbing is set, because a template taken off drawings rarely matches what’s actually in the wall. → See countertops

Medicine Cabinets

Recessed and surface-mounted stainless steel medicine cabinets with mirrored or framed doors, fixed or adjustable shelves, and locking options for healthcare and residential-style units. Recessed models need a framed opening — send us the wall type and we’ll give you the rough opening dimensions. → See medicine cabinets

Cubicle Curtains & Tracks — Section 10 21 23

Healthcare privacy curtains on ceiling-mounted track, with mesh tops for sprinkler clearance, in antimicrobial and inherently flame-resistant fabrics — launderable or disposable, with snap-on carriers so infection control can change a curtain out in minutes instead of an hour. Track in surface-mounted or recessed, straight runs, curves and bends. → See cubicle curtains and tracks

Bike Racks

Inverted-U, wave and post-and-ring racks in stainless steel, galvanized and powder-coated finishes, surface-mounted or in-ground. Many NYC projects carry a bike parking requirement, so the rack count and layout are worth confirming against your local code before you order. See Bike Racks

Frequently Asked Questions

We specialize in a comprehensive range of Division 10 specialty products. This includes toilet partitions (available in stainless steel, solid plastic, phenolic, and powder-coated materials), commercial bathroom accessories, lockers, gym equipment, wall padding, bike racks, and cubicle curtains or tracks.

Mavi New York supplies and installs products throughout the New York Metropolitan and Tri-State area. Our extended service area covers New York, New Jersey, Connecticut, Pennsylvania, Rhode Island, Delaware, Maine, Maryland, Washington D.C., Massachusetts, and New Hampshire.

We do both! We offer flexible choices depending on your project needs. We can strictly operate as a stocking distributor to supply and drop-ship materials to your job site, or we can provide full-service, turn-key field measurement and professional installation services.

Material choice typically depends on your budget, estimated foot traffic, and moisture exposure. For example, Solid Plastic (HDPE) and Phenolic Core are excellent for high-humidity areas like gyms or pools because they are water-resistant. Stainless Steel and Powder-Coated Steel offer sleek, heavy-duty durability ideal for corporate office spaces.

Yes. All of our custom and standard commercial bathroom layouts can be designed and configured to meet strict ADA (Americans with Disabilities Act) planning guidelines, ensuring correct door clearance, grab bar reinforcement, and turning space.