Ceiling Hung
F.1 – Threaded Rod
Heavy-duty threaded steel rod designed to securely suspend ceiling-hung partition pilasters from overhead structural supports.
F.2 – Washer
A robust split-lock washer that bites into the metal to prevent fastening nuts from loosening under the vibrational stress of high-traffic restrooms.
F.5 – Nut
High-strength hex nut used alongside washers to firmly lock threaded suspension rods in place for overhead structural stability.
Floor Mounted
F.3 – Threaded Rod
Durable threaded steel rod engineered for rigid, reliable floor-mounting and leveling of commercial partition pilasters.
F.4 – Washer
Standard flat washer providing a smooth bearing surface to evenly distribute fastener load and protect underlying mounting brackets.
F.5 – Nut
High-strength hex nut essential for locking down floor-anchored threaded rods and securing baseline structural components.
F.6 – Rawl
Heavy-duty concrete expansion anchor (Rawl plug) designed to establish an unyielding foundation for floor-mounted pilasters in masonry.
F.7 – Nut Pro
Specialized flanged insert nut offering a low-profile, secure internal fastening point for partition hardware.
F.8 – Tap
Sturdy hex head tap bolt used for heavy structural fastening where maximum torque and sheer strength are required.
F.9 – #12 x2″ Anchor Screw
Long, heavy-duty, tamper-resistant screw perfect for driving deeply into wall anchors to secure heavy brackets and panels.
F.10 – Lead Anchors
Malleable metal expansion anchors that provide superior, pull-out resistant grip in solid masonry, brick, and concrete walls.
F.11 – Plastic Anchors
Versatile ribbed plastic wall anchors for secure, reliable fastening of lighter hardware into drywall or tile backing.
F.12 – #12 x7/16″ SS Blunt Pt. Screw
Short, blunt-point stainless steel security screw ideal for safely attaching hardware without fully penetrating the panel.
F.13 – #10 x1″ SS Tap Screw
Stainless steel pan-head security screw designed for rust-resistant, tamper-proof wall bracket installations.
F.14 – #10 x1″ SS Tap/Phillip Screw
Traditional Phillips-drive, countersunk stainless steel screw for standard, high-strength hardware mounting where security heads aren’t required.
F.15 – Security Six Lobe Drive Bit
Essential, specialized tool bit required to install and remove the tamper-resistant, pin-in-head security fasteners used throughout the washroom.
F.16 – #8-32 Unslotted Barrel Nut
Vandal-resistant, smooth-headed barrel nut (sex bolt) that provides a clean, impenetrable finish on the exterior of the partition stall.
F.17 – #8-32 Six Lobe Oval head
Tamper-proof machine screw designed to perfectly mate with the #8-32 barrel nut for a secure, through-panel connection.
F.18 – #10-24 Barrel Nut
Thicker gauge security barrel nut offering enhanced structural holding power for heavy-duty partition doors and adjoining panels.
F.19 – #10-24 Shoulder Screw
Precision-machined, tamper-resistant shoulder screw designed to mate with the #10-24 barrel nut, acting as a robust structural fastener.